What to do if the floor heating circulation is not good
With the arrival of winter, floor heating has become the main heating method for many families. However, poor floor heating circulation can lead to problems such as poor heating effect and increased energy consumption. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed analysis of the reasons and solutions for poor floor heating circulation.
1. Common causes of poor floor heating circulation
Poor floor heating circulation is usually caused by the following reasons:
| Reason | Specific performance |
|---|---|
| clogged pipes | Water flow is slow and some areas are not hot |
| air accumulation | There are bubbles in the pipes and uneven heating. |
| Water pump failure | Insufficient system pressure and slow circulation speed |
| water separator problem | Some circuits are not hot and the valves are damaged. |
| System design flaws | The pipeline is too long or the layout is unreasonable |
2. Practical methods to solve poor floor heating circulation
In response to the above problems, the following solutions can be taken:
| Solution | Operation steps |
|---|---|
| Exhaust treatment | 1. Close the return water main valve 2. Open the exhaust valve to exhaust air 3. Turn off after the water flow stabilizes |
| Clean pipes | 1. Use professional cleaning equipment 2. Circular flushing pipes 3. Discharge sewage |
| Check water pump | 1. Test water pump operation 2. Check power connections 3. Replace if necessary |
| Adjust the water distributor | 1. Check the valve switch 2. Balance the flow of each loop 3. Replace damaged parts |
| System optimization | 1. Ask a professional to evaluate 2. Add a circulation pump 3. Modify unreasonable pipelines |
3. Routine maintenance to prevent floor heating circulation problems
To keep your floor heating system running well, the following maintenance is recommended on a regular basis:
1.Annual pre-heating season inspection: Including system pressure testing, pipeline cleaning, etc.
2.Keep water clean: Use softened water or add anti-scaling agent to prevent scale deposition.
3.Exhaust gas regularly: Especially when the system is just started, it must be exhausted several times to ensure that no air remains.
4.Monitor system pressure: Keep the pressure between 1.5-2bar, too low will affect the circulation effect.
5.Avoid frequent starts and stops: Maintain stable operation of the system and reduce damage caused by thermal expansion and contraction.
4. Professional service selection guide
When the problem cannot be solved by yourself, it is recommended to choose professional floor heating repair services. According to recent consumer feedback, quality service providers should have the following characteristics:
| Evaluation criteria | Specific requirements |
|---|---|
| Qualification certification | Have formal construction qualifications |
| Advanced equipment | Use professional testing and cleaning equipment |
| Transparent service | Provide clear quotation and warranty |
| User reviews | High praise rate and few complaints |
| Response speed | Door-to-door service within 24 hours |
5. Recent hot topics
1.Intelligent floor heating control system: New intelligent temperature control equipment can automatically adjust according to usage habits to improve cycle efficiency.
2.Energy-saving renovation subsidies: Many places have introduced policies to provide subsidies for energy-saving renovation of floor heating systems.
3.New pipe materials: The anti-scale performance of PEX-Al-PEX and other composite pipes has become a hot topic of discussion.
4.Remote diagnostic service: Some manufacturers have launched remote fault diagnosis to improve maintenance efficiency.
5.Floor heating cleaning robot: Automated cleaning equipment begins to enter the household market.
Through the above analysis and suggestions, we hope to help you effectively solve the problem of poor floor heating circulation. In case of complex situations, it is recommended to contact professionals in time for system testing and maintenance to ensure comfortable and safe heating in winter.
check the details
check the details
en
