How to suppress floor heating
As winter approaches, floor heating is a common heating method in modern homes, and its installation and maintenance have become the focus of many users. Among them, floor heating suppression is a key link in the installation and acceptance process, which directly affects the safety and service life of the floor heating system. This article will introduce in detail the steps, precautions and common problems of floor heating suppression to help you better understand this process.
1. Basic concepts of floor heating suppression
Floor heating pressure refers to testing the sealing and pressure-bearing capacity of the pipeline system by pressurizing it after the installation of the floor heating system is completed. This step can ensure that the floor heating pipe will not leak or burst during subsequent use.
2. Steps to suppress floor heating
| steps | Operation content | Things to note |
|---|---|---|
| 1. Preparation | Close all valves in the floor heating system to ensure the system is closed. | Check whether the pipe connections are firm to avoid water leakage during pressure. |
| 2. Connect the pressing equipment | Connect the pressure pump to the water inlet or manifold of the floor heating system. | Make sure the connections are well sealed to avoid pressure leaks. |
| 3. Pressure test | Slowly pressurize to 1.5 times the design pressure (usually 0.6-0.8MPa) and maintain the pressure for 10-15 minutes. | Observe the pressure gauge during the pressurization process to ensure that the pressure is stable. |
| 4. Pressure maintenance inspection | Maintain the pressure for 24 hours and observe whether the pressure drop is within the allowable range (usually ≤0.05MPa). | If the pressure drops too quickly, check the pipeline for leaks. |
| 5. Acceptance completed | After passing the pressure test, release the pressure and remove the pressure equipment. | Record the suppression data as a basis for acceptance. |
3. Things to note when suppressing floor heating
1.Suppression time: Floor heating pressure should be carried out after the pipeline is installed and before filling with concrete to ensure that the pipeline does not leak.
2.Pressure value: The pressing pressure should be 1.5 times the design pressure, but shall not exceed the rated pressure bearing capacity of the pipe.
3.ambient temperature: The ambient temperature during pressing should not be lower than 5℃ to avoid low temperature affecting the test results.
4.Check for leaks: During the pressing process, it is necessary to carefully check whether there is leakage at pipe connections, water distributors and other parts.
4. Common problems and solutions
| question | Possible reasons | Solution |
|---|---|---|
| Pressure drops too quickly | Leaking pipes or loose connections | Check the pipes, repair leaks, and repressurize. |
| No change in pressure gauge | Pressure equipment failure or valve not open | Check the status of equipment and valves to ensure normal pressurization. |
| Local water seepage in pipes | Broken pipes or loose connections | Replace broken pipes or tighten connections. |
5. The importance of suppressing floor heating
Floor heating suppression is a key step to ensure the safe operation of the floor heating system. Through pressure testing, problems in pipeline installation can be discovered in time to avoid hidden dangers such as water leakage and pipe bursting in later use. At the same time, suppression data is also an important basis for acceptance to ensure that the floor heating system meets the design specifications.
6. Summary
Although floor heating suppression seems simple, in actual operation it must be carried out strictly in accordance with the specifications. When choosing floor heating installation services, users should pay attention to the professionalism of the construction team to ensure the accuracy and reliability of the pressure test. Only through strict suppression of floor heating can we provide safe and comfortable guarantee for winter heating.
I hope that through the introduction of this article, you will have a more comprehensive understanding of floor heating suppression. If you have more questions, it is recommended to consult a professional floor heating installation or maintenance personnel to ensure the normal operation of the floor heating system.
check the details
check the details
en
