How to install a license plate on a car: Hot topics and practical guides on the Internet in the past 10 days
Recently, car license plate installation has become one of the hot topics on social platforms. Especially with the popularity of new energy vehicles and adjustments to traffic regulations, car owners have more questions about the correct installation of license plates. The following is compiled based on hot spots across the entire networkStructured Guide, covering regulatory requirements, tool preparation and detailed steps.
1. Statistics of hot topics in the past 10 days
| Topic keywords | Amount of discussions (articles) | main focus |
|---|---|---|
| New energy license plate installation | 12,500+ | Difference in front and rear license plate positions |
| Anti-theft screw regulations | 8,300+ | Do I have to use special screws? |
| License Plate Frame Compliance | 5,700+ | Decorative frame occlusion risk |
2. List of necessary tools for installing license plates
| Tools/Materials | Quantity | Remarks |
|---|---|---|
| Vehicle license plate (including anti-theft screws) | 1 set | Need to check the consistency with driving license |
| Phillips screwdriver | 1 handful | Recommended magnetic head to prevent falling |
| License plate base (optional) | 1 | Need to comply with GB7258 standard |
3. Detailed explanation of step-by-step installation process
Step 1: Confirm installation location
The front license plate should be fixed in the reserved hole in the bumper, and the rear license plate should avoid the trunk switch area. The front license plate of new energy vehicles must reserve space for heat dissipation holes.
Step 2: Fix the anti-theft screws
Pass the screw through the license plate hole and screw in the anti-theft nut from the inside. Note:Cannot be replaced by ordinary screws, otherwise it may be judged as intentional occlusion.
Step 3: Adjust Leveling
Use a spirit level to ensure that the inclination of the license plate is ≤15° and that the edge of the characters is at least 5cm away from the outline of the vehicle body. Data from popular short video platforms show that 32% of car owners were asked to rework their vehicles due to tilt problems.
4. Answers to recent high-frequency questions
| question | official reply |
|---|---|
| Can the license plate frame be decorated with dolls? | The new regulations in 2023 clearly prohibit any form of occlusion |
| How to deal with rusty screws? | You need to go to the vehicle management office to apply for special screw replacement |
5. Things to note
1. Check whether it is loose after installation. Recently, many accidents of license plates falling off while driving at high speeds have caused heated discussions.
2. It is recommended that two people cooperate during self-installation to avoid scratching the car paint (17% of complaints on social media)
3. After completing the installation, it is recommended to take panoramic photos and save them to deal with possible inspection disputes.
According to traffic department data, correctly installed license plates can increase the road violation recognition rate to 99.7%. If you have any questions about installation, it is recommended to refer to the instructions issued by local vehicle management agencies.Video tutorialOr make an appointment at a professional service station for processing.
check the details
check the details
en
